Publicité
Les langues disponibles
Les langues disponibles
Programme
P5
4)
1) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
CONSUMPTION VALUES
1)
Programme
P1
P2
P3
P4
P5
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
INFORMATION FOR TEST INSTITUTES
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
SETTINGS
PROGRAMME SELECTION MODE AND USER
MODE
When the appliance is in programme selection
mode it is possible to set a programme and to enter
the user mode.
Degree of soil
Type of load
•
Fresh soil
•
Crockery and
cutlery
Water
(l)
10.2
7 - 14
12.5 - 14.5
12 - 14
10
Programme phases
•
Wash 60 °C
•
Rinses
Energy
(kWh)
0.932
0.6 - 1.6
1.4 - 1.8
0.7 - 0.9
0.9
Write down the product number (PNC) that is on
the rating plate.
In user mode, the following settings can be
changed:
•
The level of the water softener according to the
water hardness.
•
The activation or deactivation of the rinse aid
dispenser.
Options
•
XtraDry
Duration
(min)
225
40 - 160
169 - 179
75 - 85
30
25
Publicité
