Service; Safety-Relevant Accessories - Dustcontrol DC 3800 H Turbo EX Notice Originale

Masquer les pouces Voir aussi pour DC 3800 H Turbo EX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29

Service

Filter replacement
The fine filter should be replaced at least once a
year. HEPA filters should be replaced after every
300 hours of operation. Wear a dust mask when
replacing the filter. Only use an original filter.
Release and lift off the lid. To prevent the escape
of dust, place a plastic sack over the cyclone, and
remove the filter cartridge. Clean the filter plate.
Then fit the new filter.
- CAUTION! Do not reuse the main filter once it
has been removed from the machine.
The HEPA filter is removed by withdrawing the car-
tridge after opening the lid. Insert the new HEPA
filter into the holder on the motor head, then insert
the new filter cartridge into the machine and close
the lid.
Caution
The manufacturer or a trained person must carry
out an inspection at least annually, e.g. damage to
the filter, air-tightness of the dust-extraction ma-
chine and the function of the control unit.
The turbopump has a very long service life and
requires no maintenance. After approximately
10,000 hours of operation, the radial seal between
the motor and the pump should be lubricated with
bearing grease. The bearings and seals of the
electric motor must be inspected at the same time.
These must be lubricated and replaced, if
necessary. If any other wear is observed, the parts
concerned must be replaced.
Safety-relevant accessories included
Description
Suction hose 38, ESD-certified
Suction hose 50, ESD-certified
Coupling socket 50/50 ESD-certified
Connecting sleeve 38/38 turnable
ESD-certified
Intermediate sleeve 50/38,
ESD-certified
HEPA filter DC 3800 H Turbo EX
Fine filter, antistatic
Sealing plug, inlet
Plastic sack, conductive
Floor nozzle 450 A-38 ESD-certified
2020-08-18
Part No.
We can supply all safety-relevant spare parts
and wearing parts.
2027E
2028E
Dustcontrol UK Ltd.
2107E
Old Barn, Home Farm
Business Park
2114E
Church Way, Whittlebury,
Northants NN12 8XS
2120E
Tel: 01327 858001, sales@dustcontrol.co.uk,
42024H
www.dustcontrol.co.uk
4202501H
See the Dustcontrol catalogue for other ac-
42250H
cessories.
42384H
7236E
DC 3800 H Turbo EX can be ordererd with
antistatic accessories to fulfil the requirements
of the ATEX Zone 22 directive 2014/34 ATEX
137
.
DC 3800 H Turbo EX - 18
Part No 94264

Publicité

Table des Matières
loading

Table des Matières