Warranty; Safety Instructions - IKA WERKE T 10 basic Mode D'emploi

Contents
CE - declaration of conformity
Warranty
Safety instructions
Correct use
Unpacking
Useful facts
Drive unit
Assembly of clamp and stand
Working with the unit
Error correction
Maintenance and cleaning
Note to the tool set
Accessories
Permitted dispersing tools
Speed table
Technical data
List of spare parts T 10 basic
Spare parts diagramm / wiring diagram T 10 basic

Warranty

You have purchased an original IKA laboratory machine which
meets the highest engineering and quality standards.
In accordance with IKA warranty conditions, the warranty
period is 24 months. For claims under the warranty please contact
your local dealer. You may also send the machine direct to our
works, enclosing the delivery invoice and giving reasons for the
claim. You will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to
faults resulting from improper use or insufficient care and main-
tenance contrary to the instructions in this operating manual.
T10B 022005

Safety instructions

Page
In order to be able to use the appliance properly and safely, every
3
user must first read the operating instructions and observe the
11
safety instructions contained therein. Take care of these operating
11
instructions and keep them in a place where they can be accessed
13
by everyone.
13
Only staff who have been trained accordingly, know the appliance
13
and are authorised to carry out work in this field should use this
14
appliance.
14
14 Never operate the equipment with the dispersing tools rotating
15 freely. Ensure that parts of the body, hair or items of clothing
15 cannot be trapped by the rotating parts. Before switching on the
15 dispersing instrument make sure that its shaft is sufficiently
15 immersed in the medium to prevent the medium from splashing
16 out. Please ensure, however, a minimum distance between the
17 dispersing element and the base of the stirring vessel (fig. 1).
17
Do not use the appliance without a dispersing element.
17
Vibrations can cause the turning handle on the flange of the drive
25
unit and the clamp to loosen. Check that the turning handle is
secure and tighten if necessary.
It is not permitted to use the dispersing instrument with a freely
rotating dispersing element without a stirring vessel as any con-
tact can cause serious injury. It is important to ensure that the dis-
persing element is always inside the stirring vessel when the
appliance is switched on.
The equipment is also suitable for manual operation. Please follow
the relevant safety instructions and guidelines, and occupational
health and safety regulations for use in the laboratory.
king with the dispersing unit, the user must select and wear his
personal protective equipment according to the mixing hazard
category. Defective or inappropriate protective equipment can
expose the user to the risk of splashing or getting caught in the
dispersing tool.
When wor-
11