Seca 869 Mode D'emploi Et Garantie page 16

www.mirvesov.ru
– Push the display onto the wall bracket.
– If you want to change the location of the
scale, take the display out of the wall
bracket and push it into the bracket on
the weighing platform to transport it.
Power supply
The scale is generally powered by batteries.
The LC display has a low power consumption – 10,000 weighing operations can be per-
formed with one set of batteries.
bAtt
When or
quire 6 AA-type 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Open the cover.
– Insert the new batteries in the battery
compartment.
Check that the polarity is correct!
– Close the cover.
– Then turn the scale back up the right
way.
Note: the scale is prepared for use
with a seca mains unit which is availa-
ble as an accessory.
16
www.mirvesov.ru
Компания "Мир Весов"
appear in the display, you should change the batteries. You re-
Компания "Мир Весов"
Тел.: (495) 921-44-57
Connection for mains unit
Тел.: (495) 921-44-57