Bosch System Quick Start; Carrier Battery - Gazelle avec système Bosch Démarrage Rapide

3. Bosch system quick start

3.1 Carrier battery

1. Check the battery before charging it for
the first time or using it with your e-bike.
Do this by pressing the
switch on the battery.
A1
A6
A5
A3 A4
Carrier battery
C1
If there are no LEDs lit up on charge
A6
indicator A3, the battery is likely to
A5
be damaged. If at least one LED is lit, but not
all LEDs on charge indicator A3 are lit, you
will need to charge the battery fully before
first use. (Charging temperature:
0 to 40 ⁰C).
A4 A3
When charging the battery you can also
remove it and charge it off the bike.
2. Remove protector C7 from the charging
connection.
3. Connect charger plug C5 to battery A2.
40
-button A4 to
C7 C6
A2
A7
A8
A9
C7
C6
C7
C5
A2
C7
C5
Charging carrier battery on the bike
4. Connect the charger mains plug to a
mains socket.
5. Once all the battery LEDs on charge
indicator A3 are lit, the battery is fully
charged. Pull charger plug C5 out of the
charging connection and remove the
charger mains plug from the mains socket.
6. If you have charged the battery off the
bike, you should fit it back under the
luggage carrier.
You will find more information about
battery life at www.gazellebikes.com/en-gb/
service/manuals.
C6
C6