TEFAL IH2018 Guide De L'utilisateur page 23

Masquer les pouces Voir aussi pour IH2018:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
TE-PLAQUINDUCTION-NC00127885_Q7_final
• When the temperature reaches 85°C the program stops automatically and
the hob beeps 3 times.
• The timer function is not available for this mode.
SAUTÉ mode
This mode is ideal for cooking food in a small quantity of oil in order
to sauté it.
• After having turned on the hotplate with the ON/OFF button,
activate sauté mode. The light above the button is switched
on and a beep sounds confirmation.
• The default sauté temperature is 4 and the LCD screen will
display « F4 ».
• If you want to change setting, you have to press + or -
button, after each press the hob sounds a confirmation.
• When the oil and pan temperature reaches the fry
temperature setting, the hob beeps 2 times
• For information : you will find below the approximate
temperatures for 1L of oil (Ingenio cookware)
F 1
130°C
140°C
• You can use the timer function for this mode (see chapter
"Timer function"). If you use this function, the cooker will stop
automatically at the end of the programmed cooking time.
• If you want to turn off the cooker you need to do so
manually by pressing any button or on/off button.
STEW mode (slow cooking)
• After having turned on the plate with the ON/OFF button,
activate stew mode. The light above the button is switched
on and a beep sounds.
• The stew mode starts and the display shows a "chaser".
• After slowly heating, the temperature is maintained
between 80 and 100°C.
• You can use the timer function for this mode (see chapter
"Timer function"). If you use this function, the cooker will
stop automatically at the end of the programmed cooking
time. For this mode the maximum time is 2 hours.
• If you want to turn off the cooker you need to do so
manually by pressing any button or on/off button.
F2
F 3
F4
160°C
180°C
12/9/14
F5
F6
200°C
220°C
23
11:37
Page 23
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ih201812

Table des Matières