Abus TVHD75500 Mode D'emploi page 19

6. Hang the PTZ Dome from the mount using the fastening hook to help you. Then guide the cable
through the mount.
7. Align the label on the adapter with the PTZ Dome. Then tighten the housing by turning it clockwise.
Secure the adapter using the two fastening screws to help you.
To complete installation, remove the protective film from the dome.
Fastening screw
1
2
Adapter seen from
above
3
19
2
1
Adapter
Fastening hook
Label
English
Fastening screw