Burg Wächter NOISE 2160 Notice D'installation Et D'utilisation page 11

Instructions
Anti-tamper function
The siren will immediately alarm when
someone tries to remove illegally.
Reset
Press the Reset button and keep hold
for 10 sec.
Light and sound setup
can be adjusted in App:
Dashboard -> Settings -> Device manager ->
Alarm – Wireless Sirene -> 'Device'
Battery status
Device will show note in App when battery
power is low.
e.g. device list
e.g. device state
NOICE 2160
Installation & Notice
• Move ON/OFF switch to ON position.
• Pair device with BURGprotect BASE
as descripted "Pairing Device with
BURGprotect Base"
• When Pairing was succeed and tested,
mount the device to your favorite
location.
Avoid installing the device in area with a
large amount of metal or electric wire.
Finally do a test after installation e.g. by
activate SOS.
For installation use the delivered screws
and bolds and mount them with an pitch
of 70 mm.
70 mm
English | 11