Tylo STELLA 2900 3000 Notice D'installation page 14

12
Fig. 6
Connect the column. See the Electrical installation section.
Must be carried out by an authorised electrician.
Fig. 7
Install the flex tube as shown in the picture to supply the
LED panels with 12 VDC
12V Aux
Fig. 8
Place the front panel close to the column on the right-hand
side. Mind the glass. Put a piece of cardboard on the floor
for protection if necessary.
1. Connect the control panel
2. Connect the hoses, green/yellow and black hose
3. Fit the earth cable
4. Turn the water on the check that all the connections are tight
1.
2.
3.