Burg Wächter 2100 Notice D'installation Et D'utilisation page 12

Pairing sensor with Base
1. Start App.
2. Expand menu "Dashboard"
"Add Accessory"
3. Scan the QR code, printed on this
accessory.
4. The APP will auto recognize this accessory
and add it to your list. Rename it with a
perspicuous name, which says you the
exact location of the sensor in case of
alarm, e.g. "Front door".
5. Test Alarm function e.g. by triggering
an SOS alarm.
12 | English
–>
–>"Scan QR Code"
Usage
When the keypad is in sleep mode, touching
any button of the keypad could activate the
keypad.
After being activated, the keypad would
synchronize the real-time status with the
alarm system immediately; the result would
be represented by the LED status bar.
Enter your code and press [Arm], [Disarm]
or [Home Arm]. The system will fl ash once,
when key is correct and function is activated.
Note:
• When there is no operation on the
keypad, it will sleep within 10 seconds.
• When the keypad is sleeping, it will not
react to any signal sent from the system
until the next activation
Why sleep?
Since this keypad is designed to be able
to work with battery only, sleeping is the
solution for long-time use.
When the power adapter is connected, it
starts providing power and charging the
battery. With the help with over-charging
protective circuit, we recommend users to
keep the adapter connected while using
KEYPAD 2100