Technical Data; Safety Instructions - WOLFF RUMBA Traduction Du Mode D'emploi Original

1.0 Technical Data

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V 50 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 W
No-load speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 rpm
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .54 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . .67 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . .< 4,5 m/s2
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 kg
Diameter of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330 mm
2.0 Declaration of Conformity
We declare under our sole responsibility that this product is in con-
formity with the following standards of standardization documents:
DIN EN 1037, EN ISO 12100, DIN EN 60204-1, DIN EN 60745-1,
DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the
gathering of the technical documentation.
16.04.2015 i.V.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried out.
Use only recommended mounting discs and brushes. The
mounting discs must have a plain surface.
Use only genuine Wolff discs and brushes. Other parts could
affect the safety of the machine. Maintenance should be under-
taken only by qualified personnel. Use only genuine WOLFF
spare parts. Use only appropriate detergent liquids.
Have damaged insulation repaired at once, before starting the
machine. Otherwise this may result in considerable danger to
the user. See supplementary sheet "General safety instructions"
3.1 Introduction
This operating manual should be used to get the most benefit
from your Grinding machine RUMBA. Following these instructions
will both extend the life of your machine and reduce repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The Polishing machine RUMBA is designed to the highest
technical standards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at once.
03/2010
Comes with:
Polishing machine RUMBA
Tool kit
Operation manual
Accessories: (325mm discs)
Shampoo brush soft
Polishing brush hard
Mounting disc for pads
Polishing pads
Paper grinding disc, grade 40
Paper grinding disc, grade 60
Check the power cord and the plug before starting.
as instructed in this operating manual
with the machine in perfect working order.
Poliermaschine RUMBA (230 V), #013509
#
#
#
#
#
#
Use this machine only
013521
013522
013520
013523
013524
013525
9