Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standardiza-
tion documents:
DIN EN 1037, AS/NZ 3820, EN ISO 12100, DIN EN 60204-
1, DIN EN 60745-1, AS/NZ 60745, DIN EN 55014-1, DIN
EN 55014-2, according to the provisions of the: 2006/42/
EC, 2004/108/EC, 2006/95/EC, Electrical Safety Act 2002.
Dipl.-Ing. (FH) Dieter Hammel Authorised to issue
this declaration and for the gathering of
the technical documentation.
08.02.2018 i.V.
WOLFF GmbH & Co.KG | 74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply................................230V/115V/100V AC
Frequency......................................................50 Hz
Power consumption ................. .2600W/2200W/1400W
Stroke rate............................................5 000 slag/min
Weight total....................................................112 kg
Weight hood............................................. ..........40kg
Blade's width............................................... 350 mm
Speed......................................................13,5 m/min
Includes:
1 EXTRO-STRIPPER
1 Blade 350x60x1 mm
1 Blade 350x60x1,5 mm
1 U-shape blade, bottom cutting edge
1 U-shape blade, top cutting edge
1 Bump grease press
1 Blade cover
1 Tool pouch
1 Hearing protection
1 Protecting gloves
1 Screwdriver SW 6
1 Fork wrench SW17
1 Doubel Fork Wrench SW 13/17
1 Sliding sleeve 55x55 mm
1 Allen key SW 2,5
1 Allen key SW 5
1 Allen key SW 8
1 Allen key SW 4
1 Allen key SW 2
1 Manual
1 Spare parts List
2 Transport belts
1 Tool set
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 |
14
2.0 Safety Warnings
2.1 General Power Tool Safety Warnings
Attention
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmosphe-
res, such as in the presence of flammable liquids,
gases or dust.
Power tools create sparks which may ignite the Dust
or fumes.
c) Keep children and bystanders away while opera-
ting a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige-
rators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditi-
ons.
www.wolff-tools.de
Read all safety warnings and all
instructions.
Publicité
Table des Matières
