6. The device version labelled PB can be installed in bath-
rooms in zone 1, as defined by applicable law, subject
to any additional regulations concerning electrical in-
stallations in wet areas. Other versions of the device
can be installed in Zone 2 or beyond.
7. The device should only be installed by a qualified in-
staller in accordance with the applicable regulations
regarding safety and all other regulations.
8. All installations to which the device is connected should
comply with regulations applicable in the country of in-
stallation and use.
9. Extension leads or electric plug adapters should not be
used in order to supply power to the heater.
10. The device is intended for home use only. Use it solely
as described in the manual.
11. Fitting and Installation of the device must be carried
out in accordance with all local regulations for elec-
trical safety, including installation within permissi-
ble locations only. Observe bathroom electrical zone
regulations.
EN
5