TERMA ONE Mode D'emploi page 11

IR receiver
LED diode
on/off button
Turning the device on and setting heating
temperature
The following settings are activated by press-
ing of the on/off button in the following
order:
1. The device is turned on and automati-
cally set to 45° C ;
2. The heater switches to 60° C ;
Automatic switch-off (timer)
Pressing and holding of the on/off button
activates the TIMER function — the heater
works for 2 hours on setting 60° C , after which
it switches off. Active TIMER is indicated by
pulsating diode. Regardless of whether the
EN
power supply
cable
3. The heater is turned off. Current setting
is indicated by a LED diode:
— Heater is off — diode is not on.
— Heater is on setting 1 (45° C ) — yel-
low light.
— Heater is on setting 2 (60° C ) — red
light.
Device settings are also remembered after
power outage.
heater is currently on or off the TIMER can
be activated by pressing and holding the but-
ton. A quick press of the button then turns
the device off.
11