Replacing the front I/O-panel
AVERTISSEMENT : Avant d'ouvrir votre ordinateur, prenez connaissance
des consignes de sécurité fournies et suivez les instructions indiquées à la
section
Avant une intervention à l'intérieur de
intervention à l'intérieur de l'ordinateur, suivez les instructions indiquées à la
section
Après une intervention à l'intérieur de
d'autres bonnes pratiques en matière de sécurité à la page d'accueil du site
Regulatory Compliance (Conformité à la réglementation), à l'adresse
www.dell.com/regulatory_compliance.
Procedure
1
Place the I/O board in the slot on the chassis.
2
Align the screw holes on the I/O board with the screw holes on the chassis.
3
Replace the two screws (#6–32 UNC 1/4'') that secure the I/O board to the
chassis.
4
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
front
2
Replace the
computer
68
bezel.
cover.
l'ordinateur. Après une
l'ordinateur. Vous trouverez