Table des Matières
Publicité
5.3.3
Mesure des garnitures de frein
5-30
Procedure
1.
Measure the thickness of the brake lining through the inspection hole.
2.
If the remaining thickness of the brake lining is less than 5mm (0.20
in), replace the brake lining.
1. Garniture de frein - 2 Mâchoire à tambour - A = 5 mm (0,20 po)
Figure 70. Mesure des garnitures de frein
Entretien
Publicité
Table des Matières
