Publicité
Les langues disponibles
Les langues disponibles
3.9
Indication of battery charge status
After pressing a battery release button, the display shows the status of the battery and the fastening tool.
Status
All four LEDs light green.
Three LEDs light green.
Two LEDs light green.
One LED lights green.
One LED blinks green.
4
Technical data
4.1
Fastening tool
Weight (empty)
Length (fastening tool)
Application temperature, ambient temperature
Maximum length (fastener)
Fastener diameter (steel stud application)
Fastener diameter (concrete application)
Compression stroke
Maximum fastener driving frequency (Fasteners per hour)
4.2
Bluetooth
Maximum magnetic field strength
Frequency
5
Loading the fastening tool
5.1
Equipment required for driving fasteners
The fasteners are pushed manually on to the fastener guide.
5.2
Inserting the gas can
Every new gas can has a transport lock. Before inserting a new gas can, remove the transport lock.
1. Open the gas can compartment cover.
2. Push the gas can (with metering valve fitted) into the red adapter in the gas can compartment.
3. Close the gas can compartment cover.
*2208858*
Meaning
Charge status is 75 % to 100 %.
Charge status is 50 % to 75 %.
Charge status is 25 % to 50 %.
Charge status is 10 % to 25 %.
•
•
2208858
Charge status is below 10 %.
The fastening tool is overloaded or overheated
and thus not ready for operation.
GX 2-IE
3.3 kg
(7.3 lb)
500 mm
(19.7 in)
−10 ℃ ... 45 ℃
150 mm
(5.9 in)
50 mm / 60 mm
with 3.35 mm nail
(2.0 in / 2.4 in with
0.132 in nail)
60 mm / 90 mm
with 3.15 mm nail
(2.4 in / 3.5 in with
0.124 in nail)
20 mm
(0.8 in)
800
−7.6 dBµA/m
13,553 MHz ... 13,567 MHz
GX 2-IE XL
3.4 kg
(7.5 lb)
550 mm
(21.7 in)
−10 ℃ ... 45 ℃
200 mm
(7.9 in)
50 mm / 60 mm
with 3.35 mm nail
(2.0 in / 2.4 in with
0.132 in nail)
60 mm / 90 mm
with 3.15 mm nail
(2.4 in / 3.5 in with
0.124 in nail)
20 mm
(0.8 in)
800
English
7
Publicité
