Maintenance And Service; Maintenance And Cleaning; Accessories; After-Sales Service And Application Service - Bosch GCR 180 Professional Notice Originale

Maintenance and Service

Maintenance and Cleaning

Always keep the rack 10 and the guide surfaces of the der
drilling column 4 clean.
Readjusting the Sliding Guides (see figure D)
Over time the sliding guides 20 can wear down, resulting in
play between the sliding guides and the drilling column. To
eliminate this play, you have to readjust the sliding guides.
Loosen all ten hex nuts 21 using an open-end spanner (size
13 mm).
Then tighten the threaded pins 22 evenly until the play is min-
imised.
Retighten all ten hex nuts 21.
The sliding guides do not need to be replaced until the sliding
layer (red colour) is worn down. This is the case when the red
colour has disappeared and the backing material is revealed.
We recommend having the replacement done by an author-
ised customer service agent for Bosch power tools.

Accessories

Water collection ring (GCR 180). . . . . . . . . . 2 608 550 621
Sealing lid for water collection ring
(GCR 180) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 608 550 624
Fastening set:
– for concrete . . . . . . . . . . . . . . . . . . . . . . . . 2 608 002 000
– for brickwork . . . . . . . . . . . . . . . . . . . . . . . 2 607 000 745
Anchor set for concrete . . . . . . . . . . . . . . . . . 2 608 002 001
Vacuum set . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 608 550 623
Rubber seal for vacuum set (GCR 180) . . . . 2 608 550 625
Wet/dry vacuum cleaner GAS 35 M AFC
Wet/dry vacuum cleaner GAS 55 M AFC

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the drill stand.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Further informations on diamond drilling can be found under
www.bosch-diamond.com.
Disposal
The drill stand, accessories and packaging should be sorted
for environmental-friendly recycling.
Subject to change without notice.
English | 13
1 609 92A 0PW | (31.10.14)