5.
Maintenance
!
Cleaning and maintenance procedures must
only be performed by trained personnel with the
hose stretched out. Before starting work on the
0 986 610 430, make sure that no other person is in
the vicinity of the mounting device.
5.1
Cleaning
Check the guide groove (fig. 2, pos. 2) daily for dirt par-
ticles. Remove the dirt particles with an extractor
(0 986 613 111).
5.2
Checking the hose
!
Damaged hoses and connection plugs must not be
repaired.
i
Always handle the hose with care and check it every
day before use.
The hose is to be replaced if checking reveals the
following signs of damage:
R
Cracks, brittle areas or abrasions on the hose jacket.
R
Breaks in the hose.
R
Stiff connection plugs of the hose.
R
Deformed or damaged connection plug of the hose
(sealing cone, plug-in nipple, etc.)
5.3
Replacement and wearing parts
Name
Hose set
Connection set
Robert Bosch GmbH
6.
6.1
¶
If the 0 986 610 430 is passed on, all the documenta-
tion included in the scope of delivery must be handed
over together with the unit.
¶
The 0 986 610 430 is only ever to be transported in
the original or equivalent packaging.
6.2
¶
Dismantle the 0 986 610 430 and sort out and
dispose of the different materials in accordance with
the applicable regulations.
7.
7.1
Function
Compressed air (only permitted via CRR
120)
Storage temperature
Operating temperature
Ambient temperature
Maximum permitted relative humidity
(at 25 °C and 24 hours duration)
7.2
Function
Part number
0 986 610 430 (H x W x D)
0 986 610 430 (without packaging)
0 986 613 488
0 986 613 491
7.3
Function
Sound pressure level at 6 bar,
at 1 m distance
Maintenance | 0 986 610 430 | 13
Decommissioning
Change of location
Disposal and scrapping
Technical data
Supply pressure and temperature
Dimensions and weights
Noise emissions
0 986 629 130
en
Specification
6...7 bar
-25 °C – 60 °C
0 °C – 40 °C
10 °C
≤90 %
Specification
428 x 217 x 182 mm
14,2 kg
Specification
75 dB(A)
|
2015-07-29