Jensen Dynamique Mode D'emploi page 7

Clock
Press the joystick and confirm that you want to
change the time. Move the joystick to the right
or to the left to change the time.
Press the joystick to confirm the desired time.
Alarm: On/Off.
Alarm function
Select P1, P2, P3 and/or music/beep by
moving the joystick up or down when the cursor
is on the round icons. Only those functions
and levels which are in the selected favourite
programme will be activated.
NOTE: There will be no music or beep wake-up
function if the round icons are blank.
You have two options after activating the wake-
up function. You will be able to choose 'STOP'
to switch the alarm off, or 'SNOOZE' to be
woken again 5 minutes later.
Synchronising two beds
The icon with 1 bed controls bed number 1,
while the icon with 2 beds should be selected
if you want to control two beds with only one
remote control.
Push the joystick to confirm.
NOTE: Only the bed movement can be
synchronised. Refer to the chapter above:
'Synchronising two beds (double bed)'.
Keyguard/Childproof lock
You can activate the key guard below the clock
menu item. It takes about 15 seconds for the
key lock to activate once the display has gone
dark.
Rotate the joystick (clockwise) up, right, down,
left and then up to deactivate the key lock.
Tip! If you want to deactivate??? the locks
quickly, just rotate the joystick clockwise 2
turns.
Information
Select this icon to find information on which
software version is being used in the central unit
and the remote control.
Light
The brightness is adjusted by moving the
joystick to the right or the left. Press the joystick
to confirm. Double click or reduce power to
zero to turn off the light.
NOTE: This feature is only available if you
purchased a Dynamique lamp.
Timer
You can set the light to go off at a certain time.
Select the time and then press the joystick to
confirm.
NOTE: This function is only available if you
purchased a Dynamique lamp.
purchased a Dynamique lamp.
Massage
Choose between massage at the head or
the foot end or a rolling massage.
Head end massage
Move the joystick to the right or to the left
to select the desired intensity.
Press the joystick to confirm.
Foot end massage
Move the joystick to the right or to the left
to select the desired intensity.
Press the joystick to confirm.
Rolling massage
Move the joystick to the right or to the left
to select the desired intensity.
Press the joystick to confirm.
Timer
You can set the massage to stop at a cer-
tain time. Press the joystick to confirm.
Ventronic ®
Ventronic® is a silent ventilator fitted
to the base of the bed. The ventilator
removes excess heat and moisture from
the mattress and creates a cooler sleeping
climate, even on hot summer nights. Move
the joystick to the right or left to select
the desired intensity. Press the joystick to
confirm.
Double click or reduce power to zero to
turn off.
NOTE: The ventilation works best and ex-
tracts air out of the entire bed if you sleep
under a blanket or duvet.
Timer
You can set the ventilation to stop at a
certain time.
Press the joystick to confirm.
Programming favourite settings
(P1, P2 and P3)
You can programme different favourite
settings in advance. Select the function(s)
such as lighting, massage and positions
you want to save and go to the submenu
that contains P1, P2 and P3. Select the
desired application, press the joystick and
select the OK button to save.
NOTE: To change an existing programme
you should start the programme and go to
the desired functions and adapt them to
meet your wishes. You can then save the
programme in the same position, P1 - 3.
UK
D
F
NL
ESP
N
S
SF
DK
PL
7