iRobot Roomba Guide Du Propriétaire page 11

Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to remove it
from the robot.
EN
2 Pull firmly on the wheel to remove it from its
housing (see illustration below).
3
Remove any debris from inside the wheel cavity.
4 Reinstall all parts when finished.
Make sure the wheel clicks back into place.
Important:
A front wheel clogged with hair and debris
could result in damage to your floor. If the wheel is not
spinning freely after you have cleaned it, please contact
Customer Care.
7
For more information, visit global.irobot.com
Axle Wheel
Housing
Cleaning the Multi-Surface Brushes
1
Pinch the brush frame release
tab, lift the tab, and remove any
obstructions.
Remove the brushes from the
2
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the
caps. Reinstall the brush caps.
Remove any hair or debris
3
from the square and
hexagonal pegs on the
opposite side of the brushes.
Remove the bin from the
4
robot and clear any debris
from the vacuum path.
5 Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.