Publicité
Les langues disponibles
Les langues disponibles
1. As soon as the straw or hay reaches the probes,
the percentage of moisture content will be
displayed continuously on the screen.
The meter can measure moisture content in the
range from 10% to 80%. If the reading is lower than
10%, the unit will display "LO" on the screen. If the
result is over 80%, it will display "HI".
2. Press the „mem" button to store the result.
The device can memorize and record up to
50 measurements.
After the required number of measurements have
been taken, you can find out the average result
by simply pressing the „avr" button, or minimum
and maximum results by pressing respectively the
„min" or „max" buttons.
10
3. Press the ON/OFF button to switch off the device.
If no button is pushed, and the moisture content
value remains unchanged for three minutes, the
device switches off automatically.
Publicité
Chapitres
