Maytag W10607442A Guide D'utilisation Et D'entretien page 8

CYCLE GUIDE
Settings shown are default settings for that cycle. Once you select a cycle, the default modifiers or the previous set modifiers for that cycle
will be lit. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models.
Items to Cycle:
wash:
Heavily soiled, Sanitize with
colorfast fabrics Oxi & Steam or
Sanitize with
Oxi (depending
on model)
Swimsuits and Rinse &
items requiring Spin
rinsing without
detergent
Cottons, linens, Normal
and mixed
garment loads
Bright or darkly Cold Wash
colored cottons,
linens, casual
and mixed loads
No-iron fabrics, Wrinkle Control
cottons, perm
press, linens,
synthetics
Machine-wash Delicates
silks, handwash
fabrics
Heavily soiled Soak
fabrics
No clothes in Clean Washer
washer with affresh
*All rinses are cold.
8
Temperature*:
N/A
N/A
®
Soil Level: Spin
Speed:
N/A
N/A N/A
Cycle Details:
Use this cycle to eliminate 99.9% of
bacteria when used in conjunction
with the Oxi option. Preset cycle
settings must be used to achieve the
proper sanitization. Be sure to add
an Oxi product to the Oxi dispenser.
Combines a rinse and high
speed spin for loads requiring an
additional rinse cycle or to complete
a load after power interruption. Also
use for loads that require rinsing
only. If you want to Drain and Spin
only, select the Rinse & Spin cycle;
then touch to turn off the Extra
Rinse option.
Use this cycle for normally soiled
cottons and mixed fabric loads.
Cold water with an additional
wash action gently lifts stains while
caring for fabrics. Settings may be
adjusted as desired, but must use
only cold water settings.
Use this cycle to wash loads of
no-iron fabrics such as sport shirts,
blouses, casual business clothes,
permanent press, and blends.
Use this cycle to wash lightly
soiled items indicating "Machine
Washable Silks" or "Gentle" cycle
on the care label. Place small items
in mesh garment bags before
washing. This cycle uses a higher,
preset water level.
Use this cycle to soak small
spots of set in stains on fabrics.
The washer will use intermittent
agitation and soaking. After time
has expired, water will drain, but
the washer will not spin. Cycle is
complete.
Use this cycle every 30 washes
to keep the inside of your washer
fresh and clean. This cycle uses a
higher water level. Use with affresh
Washer Cleaner tablet or liquid
chlorine bleach to thoroughly clean
the inside of your washer. This cycle
should not be interrupted. See
"Washer Care. "
IMPORTANT: Do not place
garments or other items in the
washer during the Clean Washer
with affresh cycle. Use this cycle
®
with an empty wash tub.
®