HACH LANGE LOC 100 Manuel D'utilisation page 66

Batteries
D A N G E R
Risk of fire and explosion.
Only use the NiMH rechargeable batteries provided in the measuring instrument
and make sure that the batteries are correctly inserted into the battery
compartment. Incorrect insertion of the batteries could cause damage to the
instrument, fire or explosions.
Do not use other types of batteries under any circumstances. The use of other
types of batteries could cause damage to the instrument, fire or explosions.
Scope of delivery
The LOC 100 scope of delivery comprises the following items:
• LOC 100 RFID read/write device
• USB cable
• Two AA NiMH batteries
• LOC 100 user manual
Note: If any of these items are missing or damaged, please contact the
manufacturer or the responsible sales representative immediately.
English 66
Product description
The LOC 100 RFID read/write device can be used to write the operator
ID and location ID onto a sample bottle label together with the time and
date.
Every sample bottle then clearly has the following information assigned
to it:
• Location — where was the sample taken?
• Time — when was the sample taken?
• Operator — who took the sample?
This information (sample ID) can then be read by an RFID-compatible
photometer so that it can be saved together with the test results. This
allows the sample location, sample time and the operator to be
documented consistently.
The RFID starter set for sample identification comprises:
• The LOC 100 RFID read/write device
• Two operator RFID tags
• Five location RFID tags
• Five sets of sample bottle labels with sample RFID tags, in red (3
blue (3 , yellow (3 , green (3
×) ×)
All RFID tags can be written and read out as many times as required
using the LOC 100 or the RFID module in the photometer.
The following describes the writing and reading process of the individual
components in detail.
and black (3 .
×) ×)
,
×)