TFA KLIMA GUARD Mode D'emploi page 8

TFA No. 30.5010 Anleit_10_21
KLIMA GUARD
– Digital Thermo-Hygrometer
• Press the MODE button to get out of alarm value set mode. Now the product is
ready to operate with alarm feature.
• When the measured temperature meets the set values, the alarm light on the top
of the instrument will flash and the buzzer will sound for one minute. To stop the
buzzer, press any button. The LED will still be on since the alarm triggering con-
dition did not change.
• If the high alarm value is lower than the low alarm value then the alarm is acti-
vated when the measured values are within the two adjusted alarm values.
Positioning and fixing
A circular opening is provided on the rear-side of the unit for hanging on the wall.
To place the unit in the standing position use the foot supplied with the unit. Since
the humidity level within rooms can vary greatly according to the location, mount
the unit so that it will monitor the conditions in a location likely to be subject to the
most problems.
Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect
from moisture.
• Remove the batteries, if you do not use the product for a long period of time.
• Keep the instrument in a dry place.
Battery replacement
• Remove the stand. Open the battery compartment and insert two new batteries
1.5 V AAA. Ensure batteries polarities are correct. Close the battery compart-
ment.
Troubleshooting
Problems Solution
➜ Ensure batteries polarity are correct
No display
➜ Change the batteries
➜ Change the batteries
Incorrect display
14
01.11.2021 9:41 Uhr Seite 8
KLIMA GUARD
– Digital Thermo-Hygrometer
If your device fails to work despite these measures contact the supplier from whom
you purchased it.
Waste disposal
This product and its packaging have been manufactured using high-grade materials
and components which can be recycled and reused. This reduces waste and pro-
tects the environment.
Dispose of the packaging in an environmentally friendly manner using the collec-
tion systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries
from the device and dispose of them separately.
This product is labelled in accordance with the EU Waste Electrical and
Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a
consumer, you are required to take end-of-life devices to a designated
collection point for the disposal of electrical and electronic equipment,
in order to ensure environmentally-compatible disposal. Observe the
current regulations in place!
Disposal of the batteries
Never dispose of empty batteries and rechargeable batteries with ordi-
nary household waste. They contain pollutants which, if improperly dis-
posed of, can harm the environment and human health. As a consumer,
you are required by law to take them to your retail store or to an appro-
priate collection site depending on national or local regulations in order
to protect the environment.
The symbols for the contained heavy metals are:
Cd=cadmium, Hg=mercury, Pb=lead.
Specifications
Measuring range temperature: -40 °C...+70 °C (-40 °F...+158 °F)
15