Bartscher 700.082G Mode D'emploi page 32

Problem
Too low of a
temperature in
the device
Noise level too
high
Water
condensates
inside the device
Water
condensates
outside the
device
The door does
not close
properly
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please contact
a qualified expert or the manufacturer immediately.
The following are not malfunctions:
1. Sound of flowing eater. This sound occurs during normal use of the device. This is
the cooling device inside the refrigerator.
2. Condensation forming on external glass surfaces in times of high humidity is normal.
Wipe condensation with a dry cloth.
3. The compressor's surface may be hot during normal use.
WARNING! Danger of burns!
Do not touch the compressor's surface with bare hands.
Cause
• Too high of a temperature
• The device is not standing on
a level surface
• The device touches walls or
other objects
• Slightly opened door
• The door is open too long
• Slightly open door, too great
of a difference between the
cold air from the device and
the room temperature
• The device is not standing
on a level surface
• The door seal is dirty or
deformed
Solution
• Adjust the thermostat
higher
• Set the device on a level
surface
• Ensure a sufficient
distance from walls or
other objects
• Check that nothing
prevents the closure of the
door. Close the door
• Minimize the time the door
is open. Limit opening the
door
• Check that nothing
prevents the closure of the
door. Close the door
• Set the device on a level
surface
• Clean the seal, replace in
the event of deformation.
Contact a salesperson
- 31 -