Operating Mode; Manual Bypass (Swmb) - ALLTRONIC SEMIS T33 Manuel D'installation

O
PERATING MODE
*
Value rms of output voltage is fixed by the precise control of the DSP independently from input voltage, while the frequency of output voltage
is synchronized (within a tolerance to be set by the user) with that of the input for bypass use. Outside of this tolerance, the UPS
desynchronizes, bringing itself to the nominal frequency and bypass can no longer be used (free running mode).
M
ANUAL BYPASS
ATTENTION: Contact a service centre should any malfunctions be detected. UPS maintenance can only be
performed by skilled personnel who have been trained by the manufacturer.
ATTENTION: dangerous voltages even with the input, bypass, output and battery open switches can be
present inside equipment.
Removal of UPS closing panels by unqualified personnel is dangerous and can cause harm to the operator,
equipment and utilities connected to it.
"EnergyShare" (if present) socket will no longer be powered (see paragraph "Auxiliary sockets (optional)").
*
(SWMB)
- 92 -
In addition, the auxiliary