ALLTRONIC SEMIS T33 Manuel D'installation page 108

UPS Models
MODE AND EFFICIENCY
Operating mode
AC/DC yield in Eco mode
OTHER
Noise level with typical load
Casing degree of protection
Ambient temperature (8)
Colour
(1)
Maximum input current in conditions: nominal load (PF=0.9), 380V input voltage and batteries charging with 10A
(2) @ 100% load & THDv ≤ 1%
(3) To maintain output voltage within the specified accuracy range, recalibration may be necessary after a long period of operation
(4) If network frequency is within ± 5% of the selected value, the UPS is synchronized with the network. If frequency is out of the range of tolerance
or in battery operation, the frequency is the one selected +0.01%
(5) Mains/Battery @ load 0% -100%
(6) @ Mains / battery / network @ resistive load 0% / 100% / 0%
(7) Recharging current is automatically regulated on the basis of installed battery capacity
(8) 20 – 25 °C for longer battery life
SEMIS 60 NP SEMIS 80 NP
Stand By Off (Emergency power supply)
- 109 -
SEMIS 100 NP
True on line double conversion
Eco mode
Smart Active mode
Frequency Converter
> 99%
≤ 63dB(A)
IP20
0 - 40 °C
RAL 7016
SEMIS 125 NP