Setting Vox Sensitivity; Microphone Gain; Hands Free Without Accessories; Power Up - Tone Mode - Motorola RM Série Guide De L'utilisateur

Setting VOX Sensitivity

The sensitivity of the radio's accessory or
microphone can be adjusted to suit different
operating environments. VOX sensitivity can
be programmed via the CPS.
Default value is OFF. If you want to use the
VOX feature, VOX level should be set at a
value different from OFF.
• 1 = High audio input levels trigger the Tx
• 2 = Medium sensitivity
• 3 = Low audio input levels trigger the Tx

Microphone Gain

The sensitivity of the microphone can be
adjusted to fit different users or operating
environments.
This feature can be adjusted only through the
CPS. Microphone default setting is set to level
2 (medium gain).
Hands Free Without Accessories (iVOX)
• Enable iVOX by pressing the PTT button while
30
English
turning ON the radio.
• Pressing the PTT button can temporarily disable
the iVOX operation.
Note: There is a short delay between the time
when you start stalking and when the radio
transmits.

Power Up - Tone Mode

To enable/disable power up tone mode, press
SB1 and SB2 buttons simultaneously for 2-3
seconds while powering up the radio until you
hear a quick succession of beeps and an
audible voice announcement.

Reset to Factory Defaults

Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.