Publicité
Les langues disponibles
Les langues disponibles
BEFORE YOU BEGIN
It is a good idea to have drop cloths protecting your floors and
anything else in the room that you do not want accidentally
splattered with paint.
NOTE: Make sure the type of paint you use can be
cleaned with either mineral spirits (for oil-
based paints) or a warm water and soap
solution (for latex paints).
CAUTION
Some oil-based paints require a stronger cleaning solution
than mineral spirits and should not be used with the
®
PaintMate
Plus. Using a cleaning solution stronger than
mineral spirits may cause damage to the PaintMate® Plus.
Check with your paint supplier to be sure the oil-based
paint you have can be cleaned with mineral spirits.
ASSEMBLING THE PAINTMATE
1. Assemble core, roller cover and cap. Then attach
assembly to the arm, making sure the roller assembly
snaps into the locking tab.
Core
Roller cover
2. Press the quick-release tabs on the unit and attach the arm
to the handle.
3. If painting a ceiling, attach the spatter shield.
English
The Painting People
™
®
PLUS
Locking tab
Cap
Quick-release
tabs
FILLING THE PAINTMATE
1. Slide the small end of the fill tube through the hole in the
can lid.
2. Attach the can lid securely to the paint can.
1
Fill tube
NOTE: Applying a thin coat of petroleum jelly to the
end of the fill tube will help the PaintMate
Plus slide easily off the fill tube.
3. Turn the switch on the main handle to FILL.
FILL
4. Press down and firmly hold the fill valve of the main tube
onto the fill tube.
5. Pull the plunger to draw the paint into the main tube.
4
Fill
valve
NOTE: If the plunger does not move easily, twist it
slightly to free it from sticking.
NOTE: Make sure to press down firmly on the main
tube to make sure the PaintMate® Plus fills
properly.
2
© 2001 Wagner Spray Tech. All rights reserved.
®
PLUS
2
®
APPLY
5
Plunger
Publicité
