Publicité
Les langues disponibles
Les langues disponibles
11. Press the button
2 short beeps will be heard. "CAL4" will appear on the screen,
and long beep notification that calibration process has finished.
12. After finishing the calibration the device will turn off automatically.
13. To restore the factory default enter the calibration mode by
pressing and holding, both buttons
will appear on the screen.
14. Press shortly the button
on the bottom row.
15. Press and hold the button
screen, follow by momentarily confirmation –''OK" that will
appear on the bottom row.
16. Press and hold the button
to continue the self-calibration (4th step).
, "RESET" will appear momentarily
until "CAL I" will appear on the
to turn the device off.
and
until "CAL0"
39
Publicité
