Publicité
Les langues disponibles
Les langues disponibles
INDIRECT MEASUREMENTS
Indirect Measurements
This device can calculate distances based on the Pythagorean Theorem.
You can use the following working procedures to measure and calculate
distances in places which are inaccessible. There are 6 indirect
measurements modes, and you can choose the right mode by pressing
this button
Press the button
following loop:
Indirect measurement I
measurement III
measurement V
measurement
Indirect Distance Measurement I
(Calculating the opposite side of right-angle triangle)
1. Press the button
with its hypotenuse blinking, and the laser beam will be activated.
2. Press the button
The distance will be shown on the display.
3. Press again the button
of the right- angled triangle.
4. The device will automatically calculate the length of the opposite side
(X), and will show the freeze values of the hypotenuse and the adjacent
side. The height of the opposite side of right – angled triangle (X), will
be at the bottom row.
20
to switch between them.
to activate indirect measurement functions with the
Indirect measurement II
Indirect measurement IV
Indirect measurement VI
Single measurement.
once, the icon
to measure the blinking hypotenuse (1).
to measure the blinking adjacent side (2)
Indirect
Indirect
Angle
will appear on the screen
Publicité
