Publicité
Les langues disponibles
Les langues disponibles
4. To clear all stored measurements, press
and hold the button
Backlight
Short press on the button
off the screen backlight.
Laser Pointer Mode
Press and hold
Press and hold
Timer
1.Press the button
Each click on the
up time by 1 sec.
2.The timer can be set from 3 to 15 seconds.
3. After the setup of the timer, press
start the count down. The device will make a
measurement when the countdown is finished.
Flip cover / Beam finder
The unique red tinted flip cover provides unique features which are:
1. Enhancing the visibility of the red laser dot, especially in bright
light conditions.
2. Protecting the keypad from damage and accidental activation.
36
again.
will turn on or
to turn on the laser pointer mode.
again to turn off the laser pointer mode.
to setup the timer for count down measurement.
will increase the set
to
Publicité
