Kapro KAPROMETER K7 Manuel D'utilisation page 32

Angle Measurement
1. Press the button
on the screen. The laser beam will be activated, and the angle
appears at the bottom row.
2. Tilt the unit and direct the laser beam to the target, and Press the
button to measure the inclination angle, the measured value
will freeze on the bottom row.
3. Pressing on the
additional inclination measurements.
4. After pressing on the button
direct the laser beam to the target, and Press the button
measure the additional inclination angle, the screen will show
the frozen values of the previses, and the current Measurements
and blinking ±.
5. Press again on the
difference respectively.
32
seven times. The icon
or will enable you to add or subtract
or
or to calculate the sum, or
will appear
Tilt the unit and
to