Kapro KAPROMETER K7 Manuel D'utilisation page 17

Measuring Functions
This device provides various advance functions to meet most of your
measurement demands. Follow the flow diagram below to operate
your laser distance meter.
Press the button
Pressing the button
Area Volume
Area Measurements and Calculations
1. Press the button
2. Laser will be activated when entering area measurement mode.
3. Follow the instructions on the screen to measure Width (1) and
Length (2).
4. After finishing all the measurements, the calculated value
of the area will appear on the screen.
5. Press the button
.
repeatedly will activate the Space function
Single Measurement.
once to enable Area measurement.
to get to Single measurement mode.
17