Kapro KAPROMETER K7 Manuel D'utilisation page 22

Indirect Distance Measurement II
(Calculating the opposite of triangle)
1. Press the button
screen with its upper hypotenuse blinking, and the laser beam will
be activated.
2. Press the button
(1). The distance will be shown on the display.
3. Press again the button
hypotenuse (2). The distance will be shown on the display.
4. Press again the button
triangle (3). The distance will be shown on the display
5. The device will automatically calculate the total length of the
opposite side of the triangle, and will show the freeze values of
the two hypotenuses, and the triangle height. The length of the
opposite side of the triangle (X), will be at the bottom row.
22
twice, the icon
to measure the upper blinking hypotenuse
to measure the lower blinking
to measure the blinking height of the
will appear on the