Kapro KAPROMETER K7 Manuel D'utilisation page 33

Angle Measurement with "False zero"
1. Press the button
on the screen. The laser beam will be activated, and the angle
appears at the bottom row.
2. Press and hold the button
zero as "false zero". The screen will show the icon
frozen value of the reference zero, and "SET" will appear on the
screen .
3. Tilt the unit above or below the reference zero, and direct the
laser beam to the target. Press the button
the inclination with reference to the reference zero. On the
bottom left side of the screen you can see the arrow pointing if
the measurement is above or below the reference zero.
4 .Press the button
seven times. The icon
to set the inclination reference
to clear the "reference setup".
will appear
and the
to measure
33