Publicité
Les langues disponibles
Les langues disponibles
for the product before installation. If you pass the product on to anyone else,
please ensure that you also pass on all the documentation with it.
• CAUTION! RISK OF INJURY! Ensure that all parts are undamaged and
have been assembled appropriately. Risk of injury exists if assembled
incorrectly. Damaged parts can effect safety and function.
• Make sure that your delivery includes all listed parts.
• Ensure that no particles of dirt are able to damage the fittings, block or get
inside the pipe.
• Ensure that the fittings are firmly seated.
• Check the watering system for damages and tightness prior to each use.
• The watering system set must only be operated in conjunction with the pres-
sure reducer.
• Never operate the watering system unattended.
•
The watering system is temperature-resistant from 0-40 °C.
In order to avoid damages caused by frost, should the
water system not be operated at temperatures below 0°C.
• Dismantle the watering system during the period of frost and store it in a frost-
proof location, out of reach of children and pets as this product includes small
swallowable parts.
• Empty all water-bearing parts thoroughly prior to storage.
• Turn off the water tap after each use.
•
The product is not suitable for delivering drinking water.
Installation of watering system (See fig. B)
Cut the flexible plastic hose (3) in the required length and place a serial dripper
(8) at each irrigation point. Insert at the end of the plastic pipe an End dripper
(9). With the aid of the plastic pipe bracket with spike (10), you can secure the
flexible plastic pipe (3) over the irrigated soil.
You can extend, shorten or re-connect new installations of pipe sections with the
plastic pipe connectors (6). Various irrigation lines must be combined by using
the 3-way branching elements (7). Due to technical reasons must at least 10
serial dripper (8) or end dripper (9) always be connected. You can set the water
flow in the individual irrigation lines by using the water flow regulators (5). The
water flow cannot be stopped completely when using the water flow regulators
(5).
Installation of water supply (See fig. B)
Screw the tap connector (1) with pressure reducer and filter to a 26.5 mm
(G3/4") - water tap with an external thread. The watering system set must only
be operated in conjunction with the pressure reducer. Press the flexible plastic
pipe (3) first through the screw plug for plastic pipe (4) and then through the
channel on the underside of the tap connector (1) all the way to the stop.
The tap connector (1) can also be connected to an ordinary 13mm (G1/2")
plug-in systems for garden hoses by using the screw adapter (2).
Operation (See fig. B)
Open up all water flow regulators (5). Then turn on the water tap and wait until
the water has spread into the irrigation lines. Adjust now the amount of water by
using the water flow regulators (5). The irrigation system can also be controlled
via an irrigation timer or computer. Make sure that you turn off the water tap
before changing the settings on the irrigation system.
Cleaning and care
Clean the product with a slightly damp, lint-free cloth.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of
your worn-out product.
7
Publicité
