SOLAC CVG 9600/C Mode D'emploi page 17

• To replace it, line up the arrow with the open padlock and turn it in a clock-
wise direction, following the directions in the drawing, pressing the part
inwards at the same time, until reaching the padlock closed position Fig 3.
• When the filter is in place, make sure that it DOES NOT STAND OUT of
the back of the iron, otherwise you will not have fitted it properly and
water will leak from the tank.
CLEANING
A) Sole-plate
• Unplug the iron and let it cool down.
• Use environment-friendly clay-based products to clean the sole-plate.
B) Outside
• To clean the outside of your CVG, use a cloth moistened in soapy water.
• Do not clean with abrasive chemical products or solvents as it may attack cer-
tain plastic parts and / or remove some of the marks and / or indications.
• Store your CVG in the vertical position, wind the cord round the heel and
secure it with the clip.
• Although the power cord is fitted with a 360º rotational elbow, NEVER
FORCE this cord when winding it around the appliance on the first turn.
TIPS FOR DISPOSING OF
THE USED APPLIANCE
• Before disposing of your used appliance, you should make it visibly unserv-
iceable and have it disposed of according to current national legislation.
• Ask your Distributor, Town Council or Local Authority for detailed information.
WARRANTY CONDITIONS
• Solac accepts no liability for faults in your appliance in the event of non-
compliance with the specifications of the warranty conditions or failure to
follow the operating or maintenance directions included in the instruction
brochure for every appliance.
• The warranty conditions may be found in the accompanying "Word-Wide
Guarantee" booklet.
• We remind you that the damage caused by the effects of scale is not
covered by the guarantee.
CVG9600 17
17
9/4/08, 09:45:09