FUXTEC E920D Notice D'instruction D'origine page 24

Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 24 Freitag, 11. November 2016 9:38 09
Adjust the shaft length
For high or low cutting the shaft lengt can be
varied up to 34 cm.
 Loosen the threaded sleeve on the shaft
.
coupling (Œ.)
 Extend the lower shaft until the ideal
handle length is reached (œ.).
 Tighten the threaded sleeve (3.).
Adjust the working angle
For high or low cutting the cutting head can
be tilted.
 Press up the locking button (Œ.).
 Set the required working angle (œ.).
 Release the locking button until it clicks
into place.
œ4
Inserting/replacing the battery
 Charging the battery as described in the
user manual of the charger.
 Press the charged battery into the power
tool until it clicks into place.
 To remove, press the release button (Œ.)
and pull out the battery (œ.).
CAUTION!
Protect the battery contacts when the
battery is not being used. Loose metal parts
may short-circuit the contacts –
Explosion and fire hazard!
Switching on/off the power tool
Switching on
 First press and hold the switch
interlock (Œ.).
 Then press the On/Off switch (œ.).
E9œ0D