Technical Specifications; Instructions For Use - FUXTEC E920D Notice D'instruction D'origine

Redback_Pole hedge trimmer E920D_de-en-fr.book Seite 23 Freitag, 11. November 2016 9:38 09
E9œ0D

Technical specifications

Appliance
Type
Nominal voltage
Battery type EP œ0
EP 40
EP 60
No-load stroke rate
Blade length
Maximum branch thickness mm
Adjustment of teleskopic
shaft
Weight according to EPTA
Procedure 0Œ/œ003
(without battery)
Weight battery EP œ0
EP 40
EP 60
A-weighted sound pressure level
according to ISO œœ868, EN 3744:
Sound pressure level L
Sound power level L
wA
Uncertainty K
Total vibration value according to
ISO œœ867:
Emission value a
h
Uncertainty K
Hedge trimmer
(telescopically)
E9œ0D
V 40
Ah œ.0
Ah 4.0
Ah 6.0
Œ300
-Œ
min
mm 5œ0
œ4
mm 0...340
kg 3.5
kg 0.9
kg Œ.3
kg Œ.7
dB(A) 90
pA
dB(A) Œ04
dB 3.0
3.œ6
m/s²
m/s² Œ.5

Instructions for use

WARNING!
Switch the unit off and remove the battery
under the following conditions:
if the unit is left unattended;
–
before checking, cleaning or performing
–
other work on the unit;
if the unit starts vibrating excessively.
–
Before initial operation
Unpack the garden tool and accessories
and check that no parts are missing or
damaged.
NOTE
The batteries (optional; depending on
delivery scope) are not fully charged on
delivery. Prior to initial operation, charge
the batteries fully. See user manual of the
battery charger.
Adjustments before using
WARNING!
Before performing any work on the garden
tool, remove the battery.
Assembling and adjusting the
shoulder belt
 Open retaining hook and hook onto the
fastening eye on the housing.
 Adjust the shoulder belt to your height.
œ3