FUXTEC FX-4MS142 Mode D'emploi Original page 50

Check &
adjust
Spark plug
Exchange
Spark plug
connector Clean up
(optional)
Cooling fins Exam
connecting Check
elements such (tighten if
as screws and necessary)
nuts
Coupling Exam
Check and
Idle speed
adjust
Valve Check and
clearance adjust
combustion
Clean up
chamber
Fuel Check
Fuel tank Check
Fuel line Check
WARNING
A. Increase maintenance intervals if working in dusty environments.
B. All maintenance work - except for the work listed in the operating instructions -
must be carried out by qualified maintenance personnel
C. For commercial use, maintenance cycles must be adjusted as required.
Oil change
It is also recommended to replace the oil if it runs hot and loses
its lubricating properties.
1 After filling, check that the oil cover is well closed.
2 When changing the oil, unscrew the oil cover and tilt the motor towards the oil filler neck
to collect the oil in a suitable container for used oil.
3 Fill in sufficient new 4 cycle oil.
4 Screw the oil cover back in.
In case of spillage, please wipe off the overflowing oil and do not forget
to wash your hands well with soap.
WARNING
Please contact your local community for the disposal of the used oil. Please do not dispose
of used oil in the sewage system or the open environment.
Original Bedienungsanleitung FX-4MS142_de_en_fr_ita_rev01
300 h thereafter
Every x years (replace if necessary)
50
■
■
■
■b
■b
■b
■
■
■