Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Dust cleaning: To maintain the suction power of the vacuum cleaner, please clean
the dust regularly.
1. Press the button, open the dust cup and dump the dust.
Dust full
2. Turn left to remove the dust cup, and clean the dust attached to the dust cup and
the bottom cover.
Turn left
3. Turn left, and remove and clean the filter.
Push
Take out
4. Turn right, remove the top cover, take out HEPA vertically, and wash with water.
Turn right
5. When the parts are fully dry, install according to the steps.
Tip: It is advisable to carry out the above cleaning after dumping dust.
CAUTION
1. Please pay attention to sharp objects such as glass to prevent injury.
2. The parts must be completely dry before installing.
3. Do not scrub the filter cotton or apply brute force to it.
4. Please make sure that the filter cotton has been installed before assembly.
5. Do not continue to use when the filter cotton in the dust cup is damaged or if
the cleaning and maintenance are not sufficient.
64 65
GB
Publicité
