Publicité
Les langues disponibles
Les langues disponibles
PRODUCT OPERATION
Charging：
The battery is not charged at the factory. Be sure to fully charge the battery before
use.
1.
Put the main body on a horizontal table.
2.
Connect the power cord to the outlet and the charging port in the handle part
of the main body to start charging,and the power indicator flashes blue.
3.
Charging time:2.5-3.5 hours;discharging time:15-20 minutes.
1. Do not charge at temperatures below 5°C or above 40°C.
2. The indicator willflash if the battery power is low in the running process.
Cleaning
To prevent blockage of the air passage large objects like large paper and packing
materials should be removed from the area before start cleaning.
Switch button
Power indicator
1.
Press and hold the "Start" button to start cleaning.
2.
Release the "Start" button to stop cleaning.
3.
Charge when the power indicator flashes.
1. Do not use the device when the plug is connected.
2. Wait 3 seconds before starting after disconnecting the power supply.
Replacing battery:
Tip: If you need to replace the battery, please consult your dealer.
Battery is consumable. If the battery life becomes shorter and charging time
becomes longer, please replace the battery.
Battery
CAUTION
1. Cut off the power supply before removing the battery.
2. Do not use and store batteries at temperatures below 5°C or above 40°C.
3. When disposing of this product, remove the battery from the device.
4. Do not modify the device, accessories or replace the power cord or battery.
5.Battery model : MB2420A 61NR19/66.
Battery recycling: Waste batteries are important resources. When disposing of the
product, do not dispose of the battery at will.
Please treat properly in accordance with government regulations to facilitate the
recovery to the corresponding waste battery recycling facilities.
60 61
GB
1
Press the battery release button
2
Take out the battery
2
Publicité
