Technical Specifications; Instructions For Use - FUXTEC E608D Notice D'instruction D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Redback_Pole chainsaw E608D_de-en-fr.book Seite 26 Dienstag, 8. November 2016 11:15 11

Technical specifications

Appliance
Type
Nominal voltage
Battery type
EPœ0
EP40
EP60
Chain speed (no load)
Saw rail length
Maximum branch thickness mm
Adjustment of teleskopic
shaft
Oil tank volume
Weight according to
EPTA Procedure 0Œ/œ003
(without battery)
Weight battery
EPœ0
EP40
EP60
A-weighted sound pressure level
according to ISO œœ868, EN 3744:
Sound pressure level L
pA
Sound power level L
wA
Uncertainty K
Total vibration value according to
ISO œœ867:
Emission value a
h
Uncertainty K
œ6

Instructions for use

Pole saw
Switch the unit off and remove the battery
(telescopically)
under the following conditions:
if the unit is left unattended;
E608D
before checking, cleaning or performing
V
40
other work on the unit;
if the unit starts vibrating excessively.
Ah
œ.0
Before initial operation
Ah
4.0
Ah
6.0
Unpack the garden tool and accessories
and check that no parts are missing or
m/s
6.0
damaged.
mm
œ00
The batteries (optional; depending on
Œ90
delivery scope) are not fully charged on
delivery. Prior to initial operation, charge
mm
0...400
the batteries fully. See user manual of the
battery charger.
ml
70
Lubricating the chain
kg
3.Œ
The unit may be operated with adequate
chain lubricating oil only. Inadequate
kg
0.9
lubrication will reduce the service life of the
kg
Œ.3
power tool.
kg
Œ.7
 Check the amount of oil on the oil level
indicator.
Topping up the chain oil
dB(A) 85
Fill the oil tank only with an environmen-
tally compatible quality chain and bar
dB(A) 97
lubricant (according to RAL-UZ48).
dB
3.0
Do not use waste oil. Renewed contact
with waste oil can cause skin cancer.
Waste oil is environmentally harmful.
Waste oil does not have the necessary
lubricating properties and is unsuitable
œ.4
m/s²
for chain lubrication.
An oil other than the one recommended
m/s²
Œ.5
may damage the rail, the chain and the
lubricating system.
Ensure that dirt does not get into the oil
tank.
Avoid spilling oil. Always wipe up any
spilled oil.
WARNING!
NOTE
CAUTION!
CAUTION!
E608D

Publicité

Chapitres

Table des Matières
loading

Table des Matières