Removing The Screwdriver Bit Or Twist Drill; Removing The Shank Of The Angled Screwdriver - KLS Martin group ANGULUS Mode D'emploi

Instructions for Use
Angled Screwdriver ANGULUS
6.3

Removing the Screwdriver Bit or Twist Drill

Push the long, cylindrical tip of the rotatable handle part into the head of the angled
•
screwdriver to loosen (unlock) the insert.
Thereafter, the screwdriver bit or drill bit can be simply pulled out.
•
6.4

Removing the Shank of the Angled Screwdriver

Rotate the lock nut clockwise (left-hand thread), then pull the shank off the handle. If
•
required, you can use the supplied flat spanner (5).
V. 2.0 39