KLS Martin group ANGULUS Mode D'emploi page 24

Contents
1 Product Liability and Warranty ..................................................... 25
1.1 General Information ............................................................................ 25
1.2 Scope of Delivery ................................................................................ 25
1.3 Optional Accessories and Spare Parts .................................................... 26
1.4 Technical Data .................................................................................... 27
1.5 Intended Use ...................................................................................... 27
1.6 Warranty ........................................................................................... 28
1.7 User's Inspection ................................................................................ 28
1.8 Hotline............................................................................................... 28
2 Notices concerning these Operating Instructions ............................ 29
2.1 Instructions for the User ...................................................................... 29
2.2 Symbols Used ..................................................................................... 30
3 Processing, Cleaning, Disinfection and Sterilization ......................... 31
3.1 Pre-Cleaning....................................................................................... 31
3.2 Machine Cleaning and Disinfection ......................................................... 31
3.3 Sterilization ........................................................................................ 33
3.4 Reprocessing limitations, Disposal ......................................................... 34
4 Inspection Prior to Reuse ............................................................ 34
5 Application ................................................................................ 35
5.1 Screwing in screws .............................................................................. 35
6 Disassembly .............................................................................. 37
6.1 Removing the Screw Holder ................................................................. 38
6.2 Removing the Rotatable Handle Part ..................................................... 38
6.3 Removing the Screwdriver Bit or Twist Drill ............................................ 39
6.4 Removing the Shank of the Angled Screwdriver ...................................... 39
6.5 Removing the Drive Shaft .................................................................... 40
6.6 Disassembly Instructions for the Angled Screwdriver Head ....................... 40
6.6.1 Removing the gear cap using the rotatable handle ............................................. 40
6.6.2 Removing the gear unit ................................................................................... 41
6.6.3 Inserting the Gear Unit ................................................................................... 41
7 Maintenance .............................................................................. 42
8 Ecological Information ................................................................ 42
8.1 Disposal of Packing ............................................................................. 42
8.2 Disposal ............................................................................................. 42
24
Instructions for Use
Angled Screwdriver ANGULUS
V. 2.0