Optional Accessories And Spare Parts - KLS Martin group ANGULUS Mode D'emploi

1.3

Optional Accessories and Spare Parts

REF (Item no.)
50-950-10-04
50-950-20-04
50-960-15-07
50-960-20-07
50-961-15-07
50-961-20-07
50-962-15-07
50-962-20-07
50-971-07-07
50-971-00-07
50-975-05-07
50-975-07-07
50-975-09-07
50-975-11-07
50-975-13-07
50-975-15-07
50-975-00-07
50-979-05-07
50-979-07-07
50-979-00-07
REF (Item no.)
50-950-03-07
50-950-04-07
50-950-05-07
50-950-06-07
26
Optional Accessory
Wide-mesh tray for ANGULUS angled screwdriver with lid (provides space for
two disassembled angled screwdrivers and storage for accessories)
External dimensions (L × W × H) 243 × 255 × 53 mm
®
fits in ½ MicroStop
Small parts storage tray with lid (fits REF item no. 50-950-10-04)
Center Drive bit for angled screwdriver, 1.5 mm
Center Drive bit for angled screwdriver, 2.0 / 2.3 mm
Cross Drive bit for angled screwdriver, 1.5 mm
Cross Drive bit for angled screwdriver, 2.0 / 2.3 mm
Maxdrive bit for angled screwdriver, 1.5 mm
Maxdrive bit for angled screwdriver, 2.0 / 2.3 mm
Twist drill for angled screwdriver, 1.1 x 7 mm
Twist drill for angled screwdriver, 1.1 x 17 mm
Twist drill for angled screwdriver, 1.5 x 5 mm
Twist drill for angled screwdriver, 1.5 x 7 mm
Twist drill for angled screwdriver, 1.5 x 9 mm
Twist drill for angled screwdriver, 1.5 x 11 mm
Twist drill for angled screwdriver, 1.5 x 13 mm
Twist drill for angled screwdriver, 1.5 x 15 mm
Twist drill for angled screwdriver, 1.5 x 19 mm
Twist drill for angled screwdriver, 1.9 x 5 mm
Twist drill for angled screwdriver, 1.9 x 7 mm
Twist drill for angled screwdriver, 1.9 x 19 mm
Spare Parts
Shank incl. drive shaft and gear unit for Angled Screwdriver ANGULUS
Screw holder for Angled Screwdriver ANGULUS
Gear unit with gear cap for Angled Screwdriver ANGULUS
Gear cap for Angled Screwdriver ANGULUS
container with a height (external dimension) of 122 mm
Instructions for Use
Angled Screwdriver ANGULUS
V. 2.0