Marking And Identification; Mounting Of The Hose - Faicom V Notice D'utilisation Et D'entretien

6 - MARKING AND IDENTIFICATION

TORINO RENATO
BUSCA (CUNEO) ITALY
VL4H3820ST
HOSE REEL for Water 150°C
AVVOLGITUBO Acqua 150°C
Year of construction
and serial number
7 - MOUNTING OF THE HOSE (Models without hose)
7.1
7.2
7.3
400 bar 3/8" 20 m
TORINO RENATO
2010 S/N. 1100
The hose reels without hose are supplied with the un-
loaded spring.
Use a hose with dimension and pressure characteristics
suitable for use according to the hose reel model.
7.1) Fix the hose reel to the bench.Put the hose betwe-
en the guide rollers, connect it to the fitting which is
inside the drum and tighten by the suitable wrench.
7.2) Rotate manually the drum in order to rewind com-
pletely the hose.
7.3) Hold the hose-end and rotate the drum 1 turn in
the opposite direction to pre-load the spring. Insert
again the hose-end between the guide rollers.
7.4) Put the hose rubber stopper at the desired length.
7.5
- 10 -
We affix the CE marking
as the manufacturer of this
equipment.
On the equipment is secure-
ly attached a tag with curing
adhesive system on which,
in addition to the name of
the manufacturer and the
symbol "CE", all necessary
information for good identi-
fication of the machine are
indicated (model, duty, year
of construction, weight, etc.).
7.5) Unwind the hose and
rewind it completely, to
check if the hose reel
works properly.
WARNING!
WARNING! DO NOT PUT
HANDS OR ANY OTHER
THING INSIDE THE DRUM!