Mennekes AMTRON Wallbox Guide D'installation page 12

E
Slide cover down and bolt into place using the screws 2
and the supplied bit insert.
F
Mount the optionally available protective roof (Item No.
18559) using the supplied screws, if required.
G
Feed connection line 5 into the charging station. Mount
AMTRON® charging station 6 onto the stainless steel
column, using the supplied counter-sunk screws M6 x 20
for this purpose.
 Please observe the corresponding installation manual for
the installation of the charging station,
Wechsel ein-auf zweispaltig
4
Cleaning after assembly.
MENNEKES recommends cleaning the stainless steel
column after assembly with the supplied cleanig cloth.
This will remove possible dirt accumulations which can
collect during the installation.